Incinerator Model TS250 PLC, Overview
This model is small-scale waste incineration equipment for small waste output. Construction
|
Main Product List per 01 set |
Main Combustion Chamber |
|
Secondary Combustion Chamber |
|
|
Smoke Filter Chamber |
|
|
Incinerator PLC Control Case |
|
|
Chimney:10.0Meters *(update to Stainless Steel, free price ) |
|
|
Italy oil/gas burner: 02 units |
|
|
Oil Tank (if oil fuel): 300Liters |
Items/Model
TS200(PLC)
Picture
Principle
Solid Waste Incineration Treatment
Burn Rate
Average 250 kg/hour
Feed Capacity
Average 350kg/feeding
Control Mode
PLC(Programmable Logic Controller Incinerator)
Combustion Chamber
1800L
Internal Dimensions
150x110x110cm
Secondary Chamber
750L
Smoke Filter Chamber
Yes
Feed Mode
Manual
Voltage
220V
Power
0.9Kw
Oil Consumption (kg/hour)
Typical 28
Gas Consumption (m3/hour)
Typical 33.6
Temperature Monitor
Digital Display
Temperature Protection
Yes
Oil Tank
300L
Feed Door
80x60cm
Chimney
10Meter
Chimney Type
Stainless Steel
1st.
Gross Weight
8500kg
External Dimensions
300x160x190cm
Burner operation should be Automatic On/Off
Fuel: diesel
The provider must provide necessary information for the finest of the installation
This incinerator with”PYROLYTIC” combustion must have:
;
・ Refractory concrete:
§. Thickness : ≥100 mm
§ . Nature: 42 percent of Al203
・ Insulate in fibrous panels:
§. Thickness: ≥75 mm
・ Character: Calcium silicate.
* Burner of lighting of waste, with gas, regular mono-bloc casting guiding plunging flame, lighting and security of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, preventing the fixing of glass and slags.
A chamber of post combustion of gases
* A burner of combustion of gases,
* A device of injection of air allowing a entire recombustion of gases,
* A device of air inlet of cooling of waste gases,
* A sheath of evacuation of the gases burnt.
* Carcass in strong sheet steel with support of connection.
* Composition of the refractory;
・ Refractory concrete:
§ Thickness: ≥150 mm
§ Character: 65% of Al203
・ Insulate in fibrous panel:
§ Thickness: ≥85 mm
Character: Calcium
§ Nature: 65% of Al203
・ Insulate in fibrous panel :
§ Thickness: ≥85 mm
Nature: Calcium
