It’s anticipated that the Bidder will cooperate closely with PATH and target Hospitals for the new waste management
building/area and will make available all needed technical information, drawings, etc.,
The following waste streams shall be treated in the new HCW treatment center(s):
Infectious waste
Sharps waste
Pathological waste
Pharmaceutical waste including cytotoxic or genotoxic waste
Small amounts of chemical waste
TECHNICAL SPECIFICATION FOR PROCUREMENT OF”MEDICAL WASTE TREATMENT PLANT”
Lot-A
Specification
1. Hydroclave for Medical waste Treatment Plant: Quantity: 02 Nos.
General Requirements
The chip must be accepted to purge & treat the following types of medical waste:
-Liquids: Blood, body fluids .
-Blood bags & tubing, gloves, Gowns, drapes, etc..
-Sharps & Sharp containers
-Disposable instruments
-Glass products
-Human and animal tissue (surgical and pathologic) –Based upon MWM regulations
-Cultures, stocks and glassware
The chip must comply with a documented efficacy level of 6log10 decrease in spore survival (99,9999%) of the
Bacillus Stearothermophilus
The chip should reduce the volume of the waste by 60% to 80% through complete dehydration and sterilization of
the waste
The chip must have ZERO harmful emission level and meet or exceed all criteria required by the EU.
The whole waste treatment system should be offered as a complete unit consisting of following equipment and
ancillaries-
(A)The sterilization processing unit
(B)Steam Boiler
(C)Tub washer
(D)Heavy duty external shredder-
(E)Conveyer belt-based on Manufacturer’s Recommendations
(F)Bin Lift/Tipper
(G)Spore tester
(A)Features and Specifications of the Sterilization Processor unit:
Technical specification of the chip:
Steam autoclave in combination with a heavy duty Fragmenting System within the vessel/chamber
The boat must be of Double Chamber
Ability (kg/load): minimum 200 kg/batch/cycle
Volume of 140-190 liters of bulk per cycle
Average Cycle time: 60 minutes
Operating temperature: 121◦C to 135◦C
Running pressure: 1.1 Bar to 2.4 Bar
Operating pressure : 1.1 Bar to 2.4 Bar
