The incinerator shall be equipped with water injection nozzle link. If the temperature in the primary
chamber should rise too high (normal temperature between 300 and 800? C) during the working time, the automated water
injection shall be actuated to decease the temperature.
- The incinerator shall have the following features and facilities:-
a- Gas oil grade No. 2 (diesel oil) fired burners 220V, 50 Hz, single phase 4 wire electricity supply electric
motors insulated to Class “F” suitable for operation at 50?
b- The incinerator to be fully assembled logic and wired function tested from the factory, prior to dispatch.
c- One high flue gas temperature indicator/alarm to provide an audio/visual warning in the event of high flue gas
temperatures occurring in two stages:-
d- First stage audible alarm, second phase incinerator shutdown, with a single voltage free contact for connection to a
remote alarm system.
e- Flexible cable control linkages to bring under fire air, overfire air and burner slide plate control front of
incinerator.
f- One fire protection system, comprising fusible links over burners, deadweight fire valve, electrically
interlocked with incinerator controls.
g- Special feeding door with thermal lock to protect the operator from injury.
I- Two sets of comprehensive written directions.
components are converted into gas by heat that’s produced through incomplete combustion as the result of a deficiency
of air, and a gas reactor (thermal reactor) in which the gas is burned with a controlled surplus of air.
- The incinerator shall consist of a low temperature carbonizing changer (primary chamber) in which the waste
chamber should rise too high (normal temperature between 300 and 800? C) during the working time, the automated water
injection shall be actuated to decease the temperature.
- The incinerator shall be equipped with water injection nozzle connection. If the temperature in the primary
– Fuel oil grade No. 2 (diesel oil) fired burners 220V, 50 Hz, single phase 4 wire electricity supply electric
- The incinerator shall have the following features and facilities:-
motors insulated to Class “F” suitable for operation at 50? C ambient temperature.
– Fuel oil grade No. 2 (diesel oil) fired burners 220V, 50 Hz, single phase 4 wire electricity supply electric
motors insulated to Class “F” suitable for operation at 50?C ambient temperature.