steps of waste management

by medical-waste-incinerator

on January 5, 2023

	Item
Specification	Model
A1500	Internal Dimensions
150 x 100 x 96cm	Suit for Animal	Cat – yes	Dog – yes	Pig – yes
Cow – small	Main Product List
Primary Combustion Chamber
Secondary Combustion Chamber
Mix-Combustion Chamber
Wet Scrubber( Washing Tower)
Incinerator Control Case
Chimney:10.0Meters *(Update to Stainless Steel, free Price )
Italy oil burner: 03 sets

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.medical-waste-incinerator.com/

Oil Tank: 500Liters

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other creature incineration

hospital waste management ppt 2018

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Power	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Temperature Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm

brick incinerator design,The control system shall include an electronic performance monitoring and logging system. The system shall be capable of monitoring and logging chamber temperatures at regular intervals (not less than once per minute, with the capacity to vary the logging frequency). The system shall include the capacity to download the performance data by USB connection.

All the measuring devices attached with the incinerator should have digital display and should have provision of connecting to the recording system, which should include fuel meter and separate energy meter.

The temperature shall be determined against the inside wall of the combustion chambers. An audible and visible alarm shall be installed to warn the operator when the secondary temperature drops to below the required temperature.

The primary chamber must meet or exceed the following criteria:

“• Heavy steel construction.

• Fixed hearth geometry and starved air gasification operational mode.

• Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm.

• Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm.

• Refractory lining of all the ducts shall be done with refractory castings. Superior quality ceramic wool shall be used at all hot duct flanges and expansion joints.

• Multiple electric ignition fuel burners designed to use automotive diesel fuel.

• Flame of the primary burner shall be oriented towards the center of the unit which does not impinge directly on the refractory floor or wall. The secondary burner shall be positioned in such a way that the flue gas passes through the flame.

• The unit shall prevent leakage of the hot flue gas and any backfire.

• An electrically powered fan forced air supply, with the capacity for variation by the operator.

• Digital thermometers connected to electronic dataloggers. The thermometers shall be located on the chamber walls away from the fuel burner.

• A differential air pressure gauge connected to an electronic datalogger