Author: medical-waste-incinerator

Maintenance control recommendation. 2.3 Ash. Additional components and also consumables recommended by the Distributor. ▪ The key combustion chamber is the significant framework of the. certification. ▪ The system provided will be established to run normally under ▪ The maintenance agreement cost includes work, transport and also. A cover; ▪ To supply diesel services storage […]
The Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances.   Cadmium and compounds as     Cd Mercury                                      Hg Thallium                                     Tl   Chromium                                  Cr Beryllium                                    Be Arsenic                                       As Antimony                                    Sb Barium                                        Ba Lead                                            Pb Silver                                          Ag Cobalt                                         Co Copper                                        […]
? Incinerate minimum 80kg/hr X 12 hrs daily ? Disposal of the two non-hazardous and hazardous waste streams (per waste inventory) ? Mobile Unit (Skid mounted taste with lifting points) Design/Specifications ? Incinerators must have a secondary combustion chamber with a minimum temperature range of 900c ? Liquid waste streams shall be incinerated by an […]
Class 2          Industrial Incinerators Class 2A:    Commercial Incinerators for the disposal of waste that contains hazardous, possible hazardous and bio-medical waste in which the operator exceeds 100 Kg/day. Dimensions: 2.2m(l) x 1.5m(w) x 2.5m(h) Fully automatic computer multi control system. Fuel Options- Diesel and natural gas, electricity Wasted fuel- >12L/h The incinerator should burn […]
Ensure flame contact with all gases is achieved. –yes Ensure residence time is not less than two (2) seconds. –yes Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is less than 1100oC. –1000-1200 oC   Ensure the oxygen content of the emitted gases […]
Combustion Efficiency     99.99percent Retention time    Of the flow pollutants less than 2 Sec in the hot part. Excess Oxygen concentration  Of primary combustion chamber 3-6% max. Refractory    The chambers should be lined with high thermal insulating refractory bricks with appropriate thickness and with exceptionally temp. resistance. Less than 1400 C for the first combustion chamber, […]
We are searching for small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr, 20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any sort (like hospital wastes) per day or per hour. Should it be without a smoke, no fumes, no odour (smell), no dust, […]
Our assortment of incinerators cater for small to large scale animal cremation related businesses, such as poultry farms, cattle farms, sheep farms, pig farms, stables, kennels, testing laboratory, catteries, pet crematoriums. The containerized mobile incinerator mounted in ISO container before leave factory, pre-installation, no incineration home build structure, movable by dust and truck lamp sterilization […]
1. Solidifier (Fluid waste disposal product)   Liquid Waste Solidifier for Water Based Particular Features of Solidifier 2lb jar Effectively solidifies potentially serious infectious waste fast Quickly8 penetrates to solidify blood and body fluid to convert Gels in seconds No shaking required Retrains solidity to prevent spills and leaks for secure and easy bagging and […]
Physical /Chemical Characteristics: Boiling Point (_F):  N/A                     Appearance & Odor: Off white, odorless Vapor Pressure(mm Hg): N/A        Volatiles (% by weight): N/A Vapor Density (Air =1):N/A         Evaporation Rate )n-butylacetate=1): N/A HMIS Classification: Health:1; Flammability: 1   Reactivity Data: Stability: Stable Conditions to Avoid: None Know Incompatibility (materials to avoid: Strong oxidizers Hazardous Decomposition: Thermal […]
combustion chamber and one flue gas afterburning chamber. The incinerator must be able to satisfy the following parameters:   1. Treatment capacity of: a) 50 kg waste per hour.   2. Temperature: Main combustion chamber up to 850°C, and in the second chamber > = 1,100 °C   3. Retention Time: 2 seconds from the […]
Guide autoclave with vertical loading; gravity displacement type with possibility for Vacuum.   Capacity:      Up to 12 kg/h   Chamber size:      >150 Dimensions   Material:       Stainless steel   Temperature:       134 °C   Additional information:   Minimum autoclave room size shall be 150 liters and shall have a usable quantity (loading basket) of 100 liters. Shall […]
The manufacturer must provide a declaration that the pressure vessel is manufactured in compliance with relevant guidelines for pressure equipment.   Following accompanying documents should be provided with the treatment system and shall be available at the Site:   1. Operation instructions (like process description). 2. Loading and maintenance processes. 3.Short-form of loading and operation […]
Incinerate: medical waste and general waste Capacity to burn waste: 400 — 500 kg/hr Fuel: Diesel Fuel Consumption: 10 litres/hr maximum Incineration temperature: 950 – 1300 °c Casing: thick (min 5 mm) Stainless steel casing and completely insulated to withstand sea humidity Voltage: 220/240 V or 380/415V Frequency: 50 Hz Feeding: automatic Ash 1 leftovers […]
Operational Capabilities PROCESS MINIMUM 1 TON PER DAY OPERATED WITH LIMITED TRAINING REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS ABILITY TO BURN WASTE LUBRICANTS (POL) HANDLE ORGANIC SOLIDS (TO INCLUDE RMW) DEPLOYABLE MOBILE 24 HRS OF CONTINUOUS USE AUTOMATIC LOADING SYSTEM AUTOMATED ASH REMOVAL SYSTEM GAS […]
Capacité destructive de 55 Kg/h jour de déchets hospitaliers  avec un p? . C. I jusqu’à 3.200 Kcal/Kg 1)Type de déchet hospitalier 2)Pouvoir calorifique inférieur                                                                        3.200 kcal/kg 3)Humidité                                                                                                          20 percent 4)Teneur  en cendres et/ou inertes                                                                       8 percent 5)Capacité destructive nominale                                                                         55 kg/h 6)Volume chambre de combustion                                                                     1,65 m3 7)Volume chambre postcombustion                                                                   2.1 m3 8)Temps  transit […]
The smokeshaft should certainly have a solid refractory cellular lining of special type of concrete to resist temperature degrees above 1200oc. The chimney should be tall enough and be at the very least one meter over the greatest structure around. The gas tank (commercial diesel) to be developed near yet out side the burner real […]
5-1- Chambre de post combustion est installée au dessus du foyer  de combustion, elle  est constituée d’un cylindre  métallique  revêtu intérieurement d’une couche d’ isolant et d’une couche de matériaux réfractaires. : 2,1 m3 Est dimensionnée pour pouvoir  garantir  un temps de fumée de 2 secondes à 1100°C avec un pourcentage d’oxygène libre d’au moins […]
Incinerators used will be restricted to daylight hours of operation. This includes shutdown, cleaning and maintenance.   Waste streams shall not be mixed during the incineration process and the ash collection chamber will be cleaned when a different waste stream is to be incinerated. The business will provide the contractor with a list of items […]
Equipped with main combustion  chamber and a second Room for reburning  Made to ensure  complete combustion  of the gases  resulting  from  incomplete  combustion  of inert gases in the chimney, within the Criteria Advocated by the World Health Organization; Equipped with temperature controller to adjust the air of the combustion of the waste, and fuel flow […]
    The following requirements are to be considered as an essential part of the technical specifications for each equipment type.   The system offered shall be made to operate normally under the conditions of different areas in Kenya. These conditions may include but not limited to power supply, temperature, humidity, and other climatic conditions. […]
It’s anticipated that the Bidder will cooperate closely with PATH and target Hospitals for the new waste management building/area and will make available all needed technical information, drawings, etc.,   The following waste streams shall be treated in the new HCW treatment center(s):   Infectious waste   Sharps waste   Pathological waste   Pharmaceutical waste […]
SECTION V   TECHNICAL SPECIFICATIONS OF THE INCINERATOR   General Description   The plant has to have four different sections that demonstrate three fundamentals of turbulence, residence time and temperature retention. The regulated sections may include but not limited to:   Overall plant layout Feed chamber/charging Primary combustion chamber Particulate scrubbers Acid gas The stack/chimney. […]
Finally, steam to  the coat should shut off, the unloading door is to be opened Then the shaft and mixing arms are reversed to behave as unloading mechanism and should scoop the waste fragments out of the unloading door, onto a conveyor belt or directly into a waste container. The vessel should now be ready […]
Medical waste, disposable syringes, infusion sets processing, cotton yarn, the operating room, the residual limb, waste rubber gloves, protective clothing and infectious and harm venereal hospital bed supplies, general wastes Hight Temperature Flue Gas Analysis Instrument, O2/CO/NO/NO2 parameter   Incinerator Items/Model HICLOVER TS10(PLC)   Burn Rate (Average) 10-20 kg/hour Feed Capacity(Average) 20kg/feeding Control Mode PLC Automatic Primary Combustion Chamber 100L Internal Dimensions 50x50x40cm Secondary Chamber 50L Smoke Filter Chamber Yes […]
Sterilization time: approx. 30 minutes at 121◦C/1.1 Tavern or approx  15 minutes at 132◦C/2.5 Tavern to reach 6log10 sterility Fragmentation within the chamber: Heavy duty with maximum size of final product
  Model HICLOVER YD-30C Picture   Feed Capacity Average 30-50 kgs per feed Burning Rate Average 30 kgs per hour Voltage 220V Power 0.59Kw Fuel Natural Gas or Diesel oil Burner Italy Burner Feed Mode Manual Fuel consumption (Oil) 10.2-20.0 Kgs/Hour Fuel consumption (Gas) 12.2-24.0m3/Hour External Dimensions 170 x 140 x 190cm (mainbody) Internal Dimensions […]
Incinerators to be appropriate for the expert disposal of clinical & & & & medical waste/ rubbish having a better lots capability from the selection of about 1000-1500 Kg. The tough, self-contained burners will provide a exceptionally powerful and effective, secure disposal in addition to be made according to proper globally instructions, e.g. CE, EU, […]
Battery Charger: Must be built in battery charger, rectifier type with transformer, circuit breaker and overload protection plugs into any 220VAC outlet. Steering: A pallet truck style steer handle for easy maneuverability. Wheels: approx. 5″ phenolic rear casters for steering and approx. 4″ phenolic wheels with roller bearings situated from the straddle legs. Brake: A […]
  Items/Model TS1000 Picture   Principle Solid Waste Incineration Treatment Burn Rate Average 1000kg/hour Feed Capacity Average 6000kg/feeding Control Mode PLC(Programmable Logic Controller Incinerator) Combustion Chamber 4800Liter Internal Dimensions 400*120*100 cm Secondary Chamber 1000Liter Feed Mode Manual/Forklift Voltage 220V/380V Power 8.0Kw Oil Consumption (kg/hour) Average 67(DO) Gas Consumption (m3/hour) *** Temperature Monitor Digital Display Temperature Protection Yes […]
? Opening Doors – the closed and fixation automated system, that are handled remotely by the operator. ? Designed to operate in long mode and quick Action ( Quick Start EP – I) ? Fully mobile – mounted on wheeled chassis Even through the operation. Incinerators must be provided As standard equipment a particular truck […]
“Waste chamber Chamber capacity 300 kg Chamber quantity .54m3 Chamber dimensions (outside) Width: 91cm, Height: 86cm Length: 152cm Door opening 66 x 76 cm Height to door 84 cm Height to top of pile 5.4 m Suggested slab dimension (L x W x Thickness) 1.8 m x 2.4 m x 10 cm Burn speed: Approximately […]
*Primary combustion chamber *Secondary combustion chamber *Smoke filter chamber * Stainless Steel chimney *Auto PLC control system *Italy brand burner * Automatic Protection Operator(APO) *Heavy duty refractory chamber *Corundum Temperature Thermometer *CE/ISO certification,etc     Incinerator Items/Model HICLOVER TS500(PLC)   Burn Rate (Average) 500-600 kg/hour Feed Capacity(Average) 600kg/feeding Control Mode PLC Automatic Primary Combustion Chamber […]
  Incinerator Items/Model HICLOVER TS30(PLC) Burn Rate (Average) 30-50 kg/hour Feed Capacity(Average) 60kg/feeding Control Mode PLC Automatic Primary Combustion Chamber 330L Internal Dimensions 75x75x60cm Secondary Chamber 180L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V 2P Power 0.5Kw Burner Type Italy Brand Oil Consumption (kg/hour) 12 N.Gas Consumption (m3n/hour) 9.8–20 Temperature Monitor Yes Temperature […]
air retention for at least 2 seconds at a temperature of less than 850C, the combustion to be able to achieve the proper effect. ? Must be a two-chamber incinerators, secondary and primary Fuel stoves ? The waste products to reduce the initial volume Potential to minimize (roughly 5% sterile ash Form). Goal: Top Loader […]
Vertical closed furnace combustion chamber incinerator   Medical waste, disposable syringes, infusion sets processing, cotton yarn, the operating room, the residual limb, waste rubber gloves, protective clothing and infectious and harm venereal hospital bed supplies, general wastes.   10-20kg/time (daily burn 3-6times, each time consume about 1 hour) total daily waste capacity 120 kg   Incinerator Items/Model HICLOVER TS10(PLC)   Burn Rate (Average) 10-20 kg/hour Feed Capacity(Average) 20kg/feeding Control Mode PLC Automatic Primary Combustion Chamber 100L Internal Dimensions 50x50x40cm Secondary Chamber 50L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V 2P Power 0.5Kw Burner Type Italy Brand Oil Consumption (kg/hour) […]
Incinerator Items/Model HICLOVER TS30(PLC)   HICLOVER TS50(PLC)   HICLOVER TS100(PLC)   Burn Rate (Average) 30-50 kg/hour 50-100 kg/hour 100-150 kg/hour Feed Capacity(Average) 60kg/feeding 100kg/feeding 350kg/feeding Control Mode PLC Automatic PLC Automatic PLC Automatic Primary Combustion Chamber 330L(0.33M3) 560L(0.56M3) 1810L(1.81M3) Internal Dimensions 75x75x60cm 100x80x70cm 165x110x100cm Secondary Chamber 180L 280L 660L Smoke Filter Chamber Yes Yes Yes […]
Dimensions: World standard: 0.83m(I) x 1.0m(w) x 1.4m(h) Burning efficacy: >98% china double chamber incinerator Features: ?     Waste type and burn rate: Designed specifically for use by poultry farmers, game-keepers and for pet cremation. The incinerator will burn up to 50 kg of waste per hour. ?     Construction: solid steel welded fabrication composed of sheet […]
Double Combustion Chamber Medical Waste Incinerator Hot Face,High aluminum firebrick 55% of Al203,1750°C Grade. Code face, High Rate Refractory Ceramic Fiber, 1050°C Grade  
Number item: 01 unit Can you please send us cataloge detail for Pet Cremation of dogs, cats. – Please services need: General about Cremation system which is appropriate Up to 600kgs per ten-hour day of Form IV pathological waste or red bag waste rated at 2200 BTU’s per kg, according to batch loading twice per […]
18   Electrical supply required 3-phase 19   Auxiliary fuel      Diesel or paraffin 20   Main burner 21 Secondary (Later ) burner 22 Kind of burners   Automatic pressure jet 23   Output Primary   Approx 600 000 kJ/hour 24   Output Secondary      Approx 750 000kJ/hour 25 Emission control Heated refractory screen Low Speed grit arrester screen     Built in 26   Paint Instance […]
INSULATION. Limiting Regular solution limit 1000 amounts C. Waste kind: MEDICAL CARE WASTE Small Capacity: 50Kg/Hour set tons. Thickness 25mm THROUGHPUT. 50kg/hour at a small calorific well worth of 4,000 kcal/kg and also a regular mass thickness of 120kg/MCubed for regular waste and 160kg/MCubed for healthcare waste.
Would plant operations be usable on a basis of 24 hours per day, 7 days a week, all year long except for regular and preventative maintenance periods? What volume and characteristics of ash could be produced from these solid wastes valorization? How many hours per year could your process be operational?   What would be […]
An operating test ought to be conducted to make certain that each of the control components have been properly installed and that all areas of the incinerator, such as controls and safety devices, are in satisfactory operating condition. The demands for prepurge and time between restarts should be confirmed. The evaluation should include but not […]
The successful bidder will deliver the incinerator slide in a container. A containerized alternative is also acceptable. incinerator with a closed air surroundings, 
Supervision of installation of the new incinerator set shall be provided by the successful Bidder while labor and heavy duty equipment shall be provided by CEB.     ?     The successful Bidder shall submit to CEB, prior to shipment of the incinerator set, its processes for the installation of the incinerator and exhaust chimney. This […]
Flue Gas Cleaning   System   ?   quoted individually )     7 Chimney Height 10m (minimal )       ?     Overall duration of the supervision of installation, testing and commissioning works shall not exceed 2 weeks.     2.11       Commissioning     Commissioning  tests  to  be  performed on  site  shall  include  but  […]
Incinerator dual chamber with capacity 1.5 m3/batch or 6 m3/ day, electronic thermocontrol range 0‐1200 C, thermocouple, air supply capacity 10m3/ minute, electricity consumption 1.2kWH/ hour, power 3 phase with netral, cooling water sprinkler capacity 5L/ minute, completed with refractory (insulation, castable, ceramic blanket) and PLC SUPPLY, INSTALLATION AND COMMISSIONING OF WASTE INCINERATOR — TECHNICAL […]
Incinerate: medical waste and general waste Capacity to burn waste: 400-500kg/hr Fuel: Diesel Gas Consumption: 10 liters/hr maximum Incineration temperature: 950-1300 degrees centigrade Casing: thick (min 5mm) stainless steel casing and fully insulated to withstand sea humidity Voltage 220/240v or 380/415V Frequency 50Hz Feeding: Automatic Ash/leftovers removal: Automatic Flue gas filtration system: Yes   Thus, […]
The incinerator fuel tank shall meet the following requirements: a) The tank shall be installed above ground and according to all of the fuel tank requirements in Section 1015 including secondary containment. b) The tank shall be sized to hold a 14 day supply of diesel fuel   6) Manufacturer has to provide the following […]
Recent Posts